When connected to a mobile phone
Turn on the headset
Turn off the headset
Mute the microphone
(when in an active call)
Cancel microphone muting
Adjust the volume
Answer a call
Reject a call
End a call or cancel an outgoing call
Transfer a call from headset to phone
Transfer a call from phone to headset
Redial the last number
Headset indicators
The green (power) and red (mic) muting lights indicate the headset's status.
General indicator lights
Green (solid for two seconds)
Green (one flash every three seconds)
Green (two flashes)
Green (two flashes every three seconds)
Green (six flashes)
Green and red (alternating flashes)
Red (solid for two seconds)
Red (solid)
Red (one flash every three seconds)
Red (one flash every 10 seconds)
Indicator lights when connected to a mobile phone
Green (one flash every three seconds)
Green (three flashes every three seconds) Incoming call
Press and hold down the power button for about three seconds.
Press and hold down the power button for at least five seconds.
Press the mic muting button.
Press the mic muting button.
Press the volume + or volume – button.
Each quick press adjusts the volume by one level.
A long press adjusts the volume by two levels.
A very long press adjusts the volume to maximum (with the volume
+ button) or minimum (with the volume – button).
Briefly press the power button.
Press and hold down the power button for two seconds.
Briefly press the power button.
Press and hold down the power button for two seconds.
Press and hold down the power button for two seconds.
Press and hold down the power button for two seconds.
Power on or pairing success: Bluetooth
Connected or page scan
Connection success
Active call or active voice chat
Power off
Pairing mode: Bluetooth
®
discovery
Pairing failure
Charge complete
Charging
Battery low or microphone muted
Connected (no call or voice chat)
discovery or Automatic (USB)
®
12