Precautions Carefully read the information in this instruction manual and on the package before using this product. Also read the instructions for the PlayStation ® 3 system. Retain all documentation for future reference. Safety Observe all warnings, precautions and instructions.
Observe all signs and instructions that require an electrical device or radio product ˎ to be switched off in designated areas, such as gas/refuelling stations, hospitals, blasting areas, potentially explosive atmospheres or aircraft. The battery used in this device may present a risk of fire or chemical burn if ˎ...
Page 5
Rear R marking BassImpact™ slider BassImpact™ converts low frequency bass sounds into pulses around the earpads. To completely turn off BassImpact™, slide the BassImpact™ slider to the OFF position until it clicks. MODE button MIC MUTE button Press to switch MIC MUTE on and off. ˎ...
Wireless adaptor Reset button Status indicator IN (audio input) jack Using the headset with the PS3™ system Compatible with PS3™ system software version 4.20 or later. Only one headset at a time can be used with the PS3™ system. Insert the wireless adaptor in the USB connector. Slide the POWER switch on the headset to ON.
Page 7
Audio Output Selection With the wireless stereo headset you can listen to PS3™ system audio, including music, videos and games, in Virtual Surround Sound. You can listen to both game audio and chat audio simultaneously. ˋ Use the MIXER slider to adjust the relative volume of game audio vs. chat audio.
Page 8
Using with a portable device You can use the included audio cable to connect the headset to the headphone jack of portable devices such as the PlayStation ® Vita system, allowing you to listen to audio and use the voice chat feature.
This product is not compatible with all mobile devices. Some features ˋ may not work on all mobile devices. For further information on mobile device compatibility, visit eu.playstation.com/ps3/support Charging the Headset When remaining battery level is low, the status indicator flashes red and a beep is heard.
Page 10
Status indicator display Headset Indicator Flashing pattern Headset status colour Blue Solid In use Flashing once repeatedly Pairing mode Flashing twice repeatedly Connection standby mode Solid Charging Purple Solid Microphone input off Light green Solid Analog audio input (output) Orange Solid System software update in progress...
Each mode has been optimized to deliver a distinct BassImpact™ effect which enhances the overall audio experience. Switch between modes by pressing the MODE button. Each time you switch between modes, there will be voice confirmation. For further instructions, visit eu.playstation.com/ps3/support. Mode Characteristics Voice Indicator Game BassImpact™...
Resetting the headset If the headset does not respond when you try to operate it, reset it by doing the following: With the wireless adaptor connected to the PS3™ system, insert a small pin or similar object into the hole for the reset button and press down for at least one second.
Specifications DC 3.7 V: Built-in lithium-ion rechargeable Power source battery 925 mAh Battery capacity 5°C - 35°C Operating environment temperature Wireless stereo headset: Dimensions (w/h/d) Approx. 183 × 182 × 90 mm Wireless adaptor: Approx. 17.4 × 8.6 × 67.4 mm Wireless stereo headset: Approx.
Page 14
This product is covered for 12 months from date of purchase by the manufacturer’s guarantee. Please refer to the guarantee supplied in the PS3™ package for full details. The wireless stereo headset for PlayStation ® 3 brings dynamic sound to your entertainment experience. Please note, wireless products may be affected by the presence of other wireless devices in the general vicinity.
Page 15
Directive 1999/5/EC. For details, please access the following URL: http://www.eu.playstation.com * For details of the model number, please see above. This product is intended to be used in the following countries: Austria, Belgium,...