Desktop Mic mode
If your headset charge runs low, you can use the headset as a desktop microphone while charging it. This is called Desktop Mic mode.
To enter Desktop Mic mode
1
Check that the PS3™ system is turned on.
2
Insert the USB connector of the supplied USB cable into a USB connector (port) on the PS3™ system.
Hint: You can use any powered port of a USB certified device, on any PC, so long as it is within Bluetooth
3
Insert the mini-B connector of the USB cable into the charging cradle.
4
Place the headset into the charging cradle.
The headset turns off and starts charging.
5
To reconnect the headset to the PS3™ system and use it in Desktop Mic mode, turn on the headset by pressing its power button for
three seconds.
UsinG yoUr Headset WitH a moBile pHone
When used with a mobile phone, your Bluetooth
answer, cancel, and end calls; change from the headset to the phone; and redial the most recent number you called. For more information,
see the "Headset controls" and "Headset indicators" sections.
Headset controls
When connected to a PS3™ system
Turn on the headset
Turn off the headset
Mute the microphone
(when in an active voice state)
Cancel microphone muting
Adjust the volume
®
Headset functions similarly to a standard Bluetooth
Press and hold down the power button for about three seconds.
Press and hold down the power button for at least five seconds.
Press the mic muting button.
Press the mic muting button.
Press the volume + or volume – button. Each quick press adjusts
the volume by one level.
A long press adjusts the volume by two levels.
A very long press adjusts the volume to maximum (with the volume
+ button) or minimum (with the volume – button).
range of the PS3™ system.
®
®
-enabled headset. That is, you can
11