Sony VAIO PCG-FR Series User Manual page 99

Precautions
Removing and installing a memory module
To change or add a memory module, proceed as follows:
1 Shut down your computer and disconnect all peripheral devices.
2 Unplug the computer and remove the battery pack(s).
3 Wait until the computer cools down.
4 Turn the computer upside down.
5 Open the memory compartment cover on the bottom by unscrewing the screw (turn anti-clockwise), as
shown.
6 To remove the memory module, pull the tabs in the direction of the
arrows numbered 1.
The memory module is released.
7 Pull the memory module out in the direction of arrow 2.
8 To replace or add memory, remove the new memory module from its
packaging.
n N
98