Sony VAIO PCG-FR Series User Manual page 81

Getting help
The message Press <F1> to resume, <F2> to setup appears at startup
This message is telling you to initialise the BIOS (Basic Input/Output System).
Check that the floppy disk drive is empty and proceed as follows:
1 Turn off the computer.
2 Remove any peripheral devices connected to the computer.
3 Turn on the computer and press <F2> when the Sony logo appears.
The BIOS setup menu screen appears.
4 Press the arrow keys to select the Exit menu.
5 Press the arrow keys to select Get Default Values and then press <Enter>.
The message Load default configuration now? appears.
6 Make sure that Yes is selected and then press <Enter>.
7 Press the arrow keys to select Exit (save changes) and then press <Enter>.
The message Save configuration changes and exit now? appears.
8 Make sure that Yes is selected and then press <Enter>.
n N
80