Color Enhancer - Mitsubishi Electric DLP NW30U User Manual

Adjusting projected images (continued)
To cancel the menu:
7. Press the MENU button.
To enable the stored color temperature:
1. Set COLOR TEMP. to USER
About color temperature
Color temperature is a way to show the differences in white. White of which temperature is low appears reddish.
When the color temperature rises, white appears bluish. For example, you can change the color temperature using
the following procedures.
To raise the color temperature: Increase the CONTRAST B (blue) and decrease the CONTRAST R (red).
To reduce the color temperature: Decrease the CONTRAST B (blue) and increase the CONTRAST R (red).
• If you set all of CONTRAST R, G, and B to negative values, the original brightness of the image can't be
obtained even when you maximize CONTRAST in the IMAGE menu.

COLOR ENHANCER

You can set the user-defi ned balance between the brightness and hue using the menu.
(See page 26 for menu setting.)
With the IMAGE menu:
1. Display the IMAGE menu.
2. Select COLOR ENHANCER by pressing the  or  button.
by pressing the  or  button.
3. Select USER
4. Press the ENTER button.
• The detailed menu for the color enhancer is displayed.
5. Press the  or  button to select COLOR SYSTEM or GAMMA MODE.
6. Press the  or  button to adjust the selected item.
COLOR SYSTEM
Use this item to change the balance between the brightness and hue.
STANDARD ...... Select when viewing images supplied from the computer.
RICH COLOR ... Select when viewing images of which brightness should be kept relatively low, such as movies
and music performance.
DYNAMIC ......... Select when viewing images supplied from the video device.
GAMMA MODE
Use this item to set the gamma optimally.
DYNAMIC ...... Select when viewing images supplied from the computer.
NATURAL ...... Select when viewing images supplied from the video device.
DETAIL ......... Select when viewing images of which brightness should be kept relatively low, such as movies and
music performance.
Important:
• You can adjust COLOR ENHANCER also by pressing the COLOR.E button on the remote control.
With the remote control:
1. Press the COLOR.E button on the remote control.
A window for color enhancer adjustment appears on the upper right of the screen.
2. Press the  or  button to select USER
3. Press the ENTER button.
4. Press the  or  button to select COLOR SYSTEM or GAMMA MODE.
5. Press the  or  button to adjust the selected item.
in the IMAGE menu.
.
EN-35
COLOR ENHANCER
When USER is selected:
COLOR ENHANCER–USER
COLOR SYSTEM
GAMMA MODE
AUTO
STANDARD
DYNAMIC