Fisher-Price N9326 Instructions Manual page 28

Problem
Receiver beeps and displays
low battery icon
Transmitter power L.E.D.
does not light
You can hear conversations or
sounds from other homes
Hint: If, after checking all of these solutions, you believe that your transmitter power cord or
AC adaptor are damaged, please contact Fisher-Price
Problems & Solutions
Battery pack in receiver is weak or dead. Use AC adaptor as
on screen power source and to charge the battery for four hours.
Transmitter power is off. Turn transmitter power on.
Loose power cord connection and transmitter power is off.
Check transmitter power cord plug-to-outlet connection.
No power to wall outlet and transmitter power is off. Make sure
light switch that controls power flow to wall outlet is on.
Power is off because circuit breaker for baby's room is off.
Make sure house fuses and circuit breakers are on.
There is signal interference due to other nursery monitors on
same channel or cordless telephone use. You may need to pair
the receiver and transmitter. Remove the receiver battery door
and press the pairing button with a paperclip. The power LED
will blink when the pairing button is released. Then, turn over
the transmitter and press the pairing button with a paperclip.
The signal L.E.D. on the receiver will flash and you will hear
a confirmation tone.
Solution
® .
28