Table of Contents
Advertisement
Problem
No image on receiver screen
Receiver beeps and out of range
screen displays
Receiver power L.E.D.
does not light
Problems & Solutions
Press the video screen on/off button. You can also change the
voice activated setting to
turns on when baby makes noise.
Batteries in receiver are weak or dead. Use AC adaptor as power
source and to charge the battery.
Transmitter camera lens is obstructed. Adjust the camera
angle on the transmitter.
Receiver is out of range of transmitter. Move receiver closer
to transmitter.
Note: Range varies depending on surrounding conditions such
as noise levels, physical obstructions and signal interference.
Under optimal conditions, the range is up to 400 feet.
Transmitter power is off. Turn transmitter power on.
Loose power cord connection and transmitter power is off.
Check transmitter power cord plug-to-outlet connection.
No power to wall outlet and transmitter power is off. Make sure
light switch that controls power flow to wall outlet is on.
Power is off because circuit breaker for room is off. Make sure
house fuses and circuit breakers are on.
Receiver power is off. Turn receiver power on.
Battery pack in receiver is weak or dead. Use AC adaptor as
power source and to charge the battery for four hours.
Power is off because circuit breaker for room is off. Make sure
house fuses and circuit breakers are on.
No power to wall outlet and power is off. Make sure light switch
that controls power flow to wall outlet is on.
Solution
. The video screen automatically
27
Advertisement
Table of Contents
