24
• Insert eight #8 x ¾" screws into the seat and tighten.
Sidebar with
Curve Out
Tabs
Tabs
25
• Fit the sidebars into the slots in the vehicle frame and
rear fenders.
Hint: Each sidebar is designed to fit one way. Make sure the
sidebar curves outward and the tabs on the ends fit into the
slots in the vehicle and fenders.
Sidebar Cover
26
• Fit the sidebar covers onto the sidebars, as shown.
Hint: The sidebar covers are designed to fit one way. If a sidebar
cover does not seem to fit, try the other one!
• Insert a #8 x ¾" screw into each sidebar cover and tighten.
Sidebar with
Curve Out
27
• Fit the front fenders onto the front of the vehicle, as shown.
Hint: The front fenders are designed to fit one way. If a front
fender does not seem to fit, try the other one!
14
Front Fenders
Sidebar Cover
P4266pr-0920