Fisher-Price P4266 Owner's Manual With Assembly Instructions page 13

Folded Folded
Tab Tab
Folded Folded
End End
19
Note: Make sure the fasteners on both short seat belts face
each other.
• Fit the folded end of each short seat belt down through the
outer slots in the seat. Do not insert the folded tab into the
slot. Pull up on each seat belt to make sure it is secure.
Folded Folded
Folded Folded
Fastener
Tab Tab
Tab Tab Side
20
Note: Make sure the fasteners on the long seat belt are facing
the fasteners on the short seat belts.
• Insert the ends of the long seat belt up through the slots in the
center of the seat.
• Fit the folded tabs on the belt up through the slots in the center
of the seat to keep the long seat belt in place. Make sure the
folded tabs are on visible on the top side of the seat.
Short Seat Belts
Fastener
Side
Long Seat Belt
21
• Fit the rear fenders under the tabs the sides of the seat,
as shown.
DO NOT insert screws here.
22
• Insert two #8 x ¾" screws into the upper hole in each side of
the seat and tighten.
Note: Do not insert screws into the lower holes on the seat in this
step. These screws will be assembled in this location in step 24.
Seat
Vehicle Frame
23
FRONT VIEW
• Fit the seat onto the vehicle frame.
13
Rear Fenders
P4266pr-0920