Fisher-Price BOUNCE N GO G4815 Instructions Manual page 5

Axle Covers
5
• Fit an axle cover over the cap nuts and to the front end of the frame.
Push down on the axle covers to "snap" them into place.
Hint: You may need to carefully tap the axle covers with a hammer
to secure in place.
Front Axle
6
• Slide a 5 / " washer onto a front axle.
16
• Next, fit an axle bushing, barrel side first, onto a front axle.
Assembly
7
• Locate both small, front wheels.
• Slide a small, front wheel, flat side first, onto the front axle.
5 / " Washer
16
Axle
Bushing
8
• Fit a wheel bushing, peg side first, into the small, front wheel and onto
the front axle.
5
Small
Front Wheel
Wheel
Bushing