Advertisement
Assembly
Lower Bend
in Post
Column
32
• Position the post so that the lower bend is toward the front end of
the coupe.
• Insert the post into the column on the back of the coupe.
Column
33
• Insert the #10 x 2
1
/
" bolt into the column on the back of the coupe.
8
• Tighten the bolt.
Hint: The handle/canopy assembly is designed to be removed for Pedal
Car use. Simply remove the #10 x 2
assembly. Store the handle/canopy in a safe place for future use.
Replace the #10 x 2
1
/
" bolt into the column on the back end of the coupe.
8
Front
Back View
1
/
" bolt and the handle/canopy
8
Label Decoration
1
3
Proper label application will help to keep the labels looking their
best! When applying labels, keep the following guidelines in mind:
• Wash your hands before applying the labels.
• Before applying the labels, wipe the surface of the vehicle with a
clean, dry cloth to remove any dust or oils.
• Place the labels exactly as shown in the illustrations.
• For best results, avoid repositioning a label once it has been applied
to the vehicle.
• After applying a label, rub the label firmly with a clean, dry cloth to
make sure the label is adhered to your vehicle. Start at the center of
a label, and smooth towards the outer edges to remove air bubbles.
12
Front View
2
Back View
Advertisement
