Fisher-Price 73528 Instruction Sheet page 6

Fisher-price riding toy user manual

Hide thumbs Also See for 73528:

Front Wheel Assembly

Fork Cover

Pedal Axle

• Place the front wheel assembly between the fork arms

so that the pedal axle fits into the groove at the bottom

of each fork arm.

• Place a fork cover over the pedal axle on one fork arm.

• Insert two #10 x ¾" screws into the fork cover

and tighten.

• Repeat this procedure to attach the other fork cover to

the other fork arm, using the #10 x ¾" screws.

PRINTED IN MEXICO

Fork Arms

Groove

Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052, U.S.A.

Assembly

Fork Covers

• Turn the frame upright.

• Insert the fork post up through

the hole in the frame neck. Make sure the fork is

positioned so that the fork covers face the rear wheels.

• Place the handlebar over the fork post and push it down

onto the frame. Make sure the handlebar is positioned so

that the screw hole faces the rear wheels and aligns with

the screw hole in the fork post.

• Insert the #8 x 3" screw through the hole in the handlebar

and into the fork post so that part of the screw (about ¾")

is still visible. Tighten the screw.

designate U.S. trademarks of Mattel, Inc.

Handlebar

Frame Neck

Fork Post

FIRST, insert the screw

so that ¾ " is visible.

THEN, tighten the screw.

¾ "

73528c-0920

Table of Contents