2
CLI Syntax Reference
Common Tasks Mapped to CLI Commands
20
This chapter provides detailed information about using the command syntax
for the 3ware CLI.
Throughout this chapter the examples reflect the interactive method of
executing 3ware CLI.
Note:
The output of some commands varies somewhat for different types of
controllers, and may vary if you have an enclosure attached. For most commands
where this is the case, examples are provided to show the differences.
The table below lists many of the tasks people use to manage their RAID
controllers and units, and lists the primary CLI command associated with
those tasks.
Table 5: Common Tasks Mapped to CLI Commands
Task
Controller Configuration Tasks
View information about a controller
View controller policies and other
details
View drive performance statistics
3ware SAS/SATA RAID Controller CLI Guide, Version 9.5.1
CLI Command
/cx show
/cx show [attribute] [attribute]
/cx show dpmstat
[type=inst|ra|ext]
Page
33
35
38