3Ware 720-0087-00 Manual page 22

3ware Escalade ATA RAID Controller CLI User Guide
Type help <command> to get more details about a
particular command
--------------------------
Example:
Escalade CLI> help info
Sample of output:
info [c<c>[u<u>|p<p>]]
- If c is not specified, it will show all the
controllers in the machine
- If c is specified and u nor p is not, it will
show information about the cth controller
- If c is specified and u is also specified, it
will show information about the uth unit on
the cth controler
- If c is specified and p is also specified, it
will show information about the pth port on
the cth controller
- u and p cannot both be specified
Examples: info // displays all the controller
found on your machine
info c0 // displays information about con-
troller 0
info c0 u4 // displays information about
unit 4 on controller 0
- Each example above can be followed by a spe-
cific option
Controller (model, firmware, bios, monitor,
numports, numunits, numdrives,
unitstatus, drivestatus)
Unit (status, rebuildstatus, verifystatus)
19
www.3ware.com