3Ware 720-0087-00 Manual page 11

Command line interface for linux; for use on 7000 and 8000 series escalade ata raid controllers
Table of Contents

Advertisement

Sample of output:
Controller 0
------------
Model: 7500-8
FW: FE7X 1.05.00.034
BIOS: BE7X 1.08.00.038
Monitor: ME7X 1.01.00.035
Serial #: D415TGZE
PCB: Rev B
Achip: 3.2
Pchip: 1.3
# of units: 3
Unit 0: RAID 5 60.3 GB (117262592 blocks):
REBUILDING (2%)
Unit 3: JBOD 20.48 GB (40000464 blocks):
OK
Unit 4: RAID 1 81.96 GB (160084480 blocks)
: VERIFYING (16%)
# of ports: 8
Port 0: MAXTOR 98196H8 V80EDX1C 81.96 GB
(160086528 blocks): OK(unit 0)
Port 1: Maxtor 98196H8 V80539XC 81.96 GB
(160086528 blocks): OK(unit 0)
Port 2: Maxtor 98196H8 V80539RC 81.96 GB
(160086528 blocks): OK(unit 0)
Port 3: Maxtor 92048D8 W802SE1A 20.48 GB
(40000464 blocks): OK (unit 3)
Port 4: Maxtor 98196H8 V80HRGRC 81.96 GB
(160086528 blocks): OK (unit 4)
Port 5: Maxtor 98196H8 V80HRGFC 81.96 GB
(160086528 blocks): OK (unit 4)
Port 6: DRIVE NOT PRESENT
Port 7: DRIVE NOT PRESENT
www.3ware.com
Command Line Interface
8

Advertisement

Table of Contents
loading

This manual is also suitable for:

7000 series8000 series

Table of Contents