Electronic Analog Clock - Smeg SCP 160 XU Instruction Manual

4. ELECTRONIC ANALOG CLOCK

LIST OF BUTTON FUNCTIONS
TIMER BUTTON
END OF COOKING BUTTON
CLOCK ADJUSTMENT AND RESET
VALUE DECREASE BUTTON
VALUE INCREASE BUTTON
4.0.1 Setting the time
When the oven is used for the first time, or after an interruption in the electrical power supply, the display
flashes at regular intervals.
Press for 1 to 2 seconds to stop the display from flashing and to start the procedure for setting the
correct time. Press the value modification buttons
minute.
Press one of the two value modification buttons until the current time appears. 6 to 7 seconds after the
last button is pressed, the clock will start at the set time.
When the oven is in standby mode, to modify the time simply press the
and adjust the time using the
will restart normal operation.
At the end of each programmed operation 8 beeps will sound 3 to 4 times at intervals of about 1 and a
half minutes. The beeps can be hushed at any time by pushing any button.
10
Instructions for the user
and buttons. A few seconds after the last button is pressed, the clock
or to increase or decrease the setting by one
button for about 2 seconds