Smeg SCP 160 XU Instruction Manual page 10

Starting cooking: besides setting a cooking time, the cooking start time can also be set (with a
maximum delay of 12 hours in relation to the current time). To set the cooking start/end time, proceed as
follows:
• Set the cooking time as described in the previous point.
• Within 6 to 7 seconds after the last time you press the
set the cooking start time. The current time will appear on the display with the inside segments
illuminated to show the end of cooking time. Use the
• 6 to 7 seconds after the last button is pressed the display will show the current time and the cooking
start and end times, which will be represented by the illuminated inner marks. The clock dial display
marks will be constantly illuminated as long as the current time is not the same as the cooking start
time; as soon as the current time reaches the set starting time, all the inner marks will start to flash,
indicating that the oven has started cooking.
• At the end of the cooking time, the timer will switch the oven heating elements off, the buzzer will start
to beep and the numbers on the clock dial will flash.
• To reset the entire program, press and hold the central
already started, the oven will have to be turned off manually.
• Here we can see a programming example: the current time is 19:06 and cooking is
programmed to start at 20:00 and end at 21:00 hours.
• At 20:00 hours the inner marks between 8 and 9 will start to flash, while the hour
hand will remain still.
Warning: for the oven to start cooking after the programming procedures just described, the
thermostat and function selector knob must be correctly set at the desired temperature and
function.
12
Instructions for the user
or buttons, press the
and buttons to set the cooking start time.
button for 2 seconds: if cooking has
button again to