Printer - Sharp PC-A250 Operation Manual

Printer

You can connect a printer to a parallel port of the external floppy disk drive unit.
Before using u printer, read the printer manual.
Setting the Setup Utility
In the menu of the Setup Utility, set the
Advanced
Also set the
Mode:.
Installing a Printer Driver
To use a printer, you need to install a printer driver.
From the
Start
.
Double-click
2.
Click
Next.
3.
Confirm Local
4.
Select the manufacturer and the printer, and click
5.
model name of your printer, you have to install the printer driver included
Select
6.
Make sure the printer name is correct, and click Ne.rt.
7.
Decide whether to print a test page, and click
8.
page, make sure the printer is ready.
RS-232C Device
You can use RS-232C devices. such as a modem or a terminal adapter with your
computer. RS-23X port is available on the external floppy disk drive unit. To use
an RS-232C device. set the item
menu of the Setup Utility. -.See each manual before using the device.
referring to your printer manual.
menu. select
Settings - Printers.
The
Add Printer. Add Printer Wizard
is selected and click
printer
and click
to
LPT Port: Auto
appears.
Next.
If you cannot find the
Next.
Before printing a test
Finish.
to or in the i\~lr~~rzc~~f
Auto Enabled
or
Enabled.