Printer; Rs-232C Device - Sharp PC-A150 Manual

Printer

You can connect a printer to a parallel port of the external floppy disk drive unit.
Before using a printer, read the printer manual.
Setting the Setup Utility
In the Advanced menu of the Setup Utility, set the LPT Port: to Auto or Enabled.
Also set the Mode:, referring to your printer manual.
4
Installing a Printer Driver
To use a printer, you need to install a printer driver.
1. From the Start menu, select Settings - Printers.
Double-click Add Printer. The Add Printer Wizard appears.
2.
3. Click Next.
Confirm Local printer is selected and click Next.
4.
5. Select the manufacturer and the printer, and click Next. If you cannot find the
model name of your printer, you have to install the printer driver included with
your printer. See your printer manual for details.
6. Select LPT1 and click Next.
7. Make sure the printer name is correct, and click Next.
8. Decide whether to print a test page, and click Finish. Before printing a test
page, make sure the printer is ready.

RS-232C Device

You can use RS-232C devices, such as a modem or a terminal adapter with your
computer. RS-232C port is available on the external floppy disk drive unit. To use
an RS-232C device, set the item Serial Port: to Auto or Enabled in the Advanced
menu of the Setup Utility. See each manual before using the device.
4-10