Resetting the System
You may need to reset the system after adding hardware or software so that your
computer will recognize the newly installed devices or software. When the message
appears after the installation, click OK, Yes, etc. to restart Windows 98.
You can also restart Windows 98 from the Starr menu. Select Shut dortn: then.
Warm Boot
If the system is locked up because of a software problem, you can reset or reboot the
system by pressing the
keys again to restart the computer.
0
Resefting may cause
Windows 98 Shut Down does not work because of sofrware malfunction.
I
Although resetting will not damage the system, you may lose the data
you are processing.
Power Switch
You can turn off the computer with the power switch if you encounter hardware or
software problems which lock up the system. In this case, press the switch for more
than six seconds.
Reset Switch
If you cannot turn off the computer by pressing the power switch, you can use the
reset switch on the bottom of your computer. To reset the system, insert a narrow
object into the small hole to slide the switch as shown.
Reset Switch
0
Do not use mefallic materials to
malfunction.
I
keys simultaneously. Press the
software reset only if
the
data loss. Use
the reset .rwitch. Ir mcly cause
slide
I
the
2-3