Resume Play; Dvd Mode Operation Indicators; Playback - Sharp QT-V5E Operation Manual

To interrupt playback
Press the PLAY/PAUSE / button.
Playback is paused.
To resume playback from the same point, press the PLAY/PAUSE
Playback resumes.
To stop playback
DVD:
Press the STOP button twice.
SVCD/VCD/CD/MP3/JPEG:
Press the STOP button.
To remove the disc
1 In the stop mode, press the OPEN/
CLOSE button.
2 Remove the disc.
3 After removing the disc, press the OPEN/
CLOSE button again.
Caution:
! Close the disc tray when not in use. Otherwise, dust may accumulate inside and
cause malfunction.
! When attempting to play discs with scratches or of a different region number, or
unplayable or restricted (*1) discs, an error message will appear on the TV display
and the disc will not play.
(*1) Viewing is prohibited on some DVDs according to the audience age.
Notes:
! When the unit is turned on, no operation is possible for 10 seconds as the unit is
proceeding the initial setting.
! Stop positions may be recorded on some discs. When you play such a disc, play-
back stops there.
! During an operation, " " may appear indicating that the operation is disabled.

" Resume play

You can resume playback from the point where it was stopped.
1
/ button.
Whilst the disc is playing, press the STOP
button.
The unit stores the point.
2
To resume playback, press the PLAY/PAUSE / button.
Playback resumes from the point you left off.
To cancel the resume playback:
Press the STOP button twice.
Notes:
! The resume play feature is disabled on some discs.
! Depending on the disc, playback may resume slightly before the position where it
was stopped.

" DVD mode operation indicators

The following are examples of indicators that appear during DVD playback.
Operation
When the power is on
without a disc
Disc data is being
read
Stop
Play
Pause
04/6/8
PRESS PLAY TO CONTINUE
TV screen Unit display
NO DISC
DISC LOADING
STOP
PLAY
PAUSE
QT-V5E_UK_3.fm
QT-V5E
1
2
DVD
VideoCD
CD
Audio Visual
Entertainment
3
4
5
6
7
8
17
9HX80432100003