Dvd Playback; Playback; To Resume Playback After Stopping (Resume Play); Dvd Mode Operation Indicators - Sharp XL-DV75H Operation Manual

DVD playback

/
ON / ON /
STAND-BY STAND-BY

■ Playback

1
Press the ON/STAND-BY button to turn the power on.
2
When the input is not set to the
disc mode, press the FUNCTION
button repeatedly to display the
startup screen.
The startup screen appears.
3
Press the ( ) button to open the disc tray.
4
Place the disc on the disc tray, label side up.
Be sure to place 8 cm (3") discs in the middle of the disc
position.
5
Press the ( ) button to close the disc tray.
Discs supporting auto start will start to play once you
close the disc tray even if you do not press the
/ ( / ) button.
6
If playback does not start in step 5, press the
/ ( / ) button.
Note:
During operate FM/AUX, OPEN/CLOSE CD tray will
change to DVD function.
To interrupt playback:
Press the / ( / ) button.
To resume playback from the same point, press the
( / ) button.
To stop playback
DVD:
Press the ( ) button twice.
ON / ON /
STAND-BY STAND-BY OPEN / CLOSE OPEN / CLOSE
1 2 3
4 5 6
7 8 9
DIRECT DIRECT
0 10 10
TUNING TUNING TUNING TUNING
PRESET PRESET PRESET PRESET
SETUP SETUP OSD OSD FUNCTION FUNCTION
EQUALIZER EQUALIZER VOLUME VOLUME X-BASS X-BASS
MEMORY MEMORY MUTE MUTE
TOP MENU TOP MENU MENU/PBC MENU/PBC
ENTER ENTER
SUB TITLE SUB TITLE
/ DIGEST / DIGEST RETURN RETURN
AUDIO AUDIO ZOOM ZOOM ANGLE ANGLE
SLOW SLOW STEP STEP RANDOM RANDOM
RDS RDS
ASPM / PTY ASPM / PTY DISP DISP A-B A-B
Audio CD/MP3/JPEG
Press the ( ) button.
When the unit is left unoperated for more than 5 minutes
after pressing the
(see page 10 when the screen saver setting is "ON").
Press any button on the main unit or remote control. The
startup screen returns.
Caution:
●
Close the disc tray when not in use. Otherwise, dust
may accumulate inside and cause malfunction.
●
The unit gets slightly warm when used for a long time.
It does not mean the unit is damaged.
●
When attempting to play discs with scratches or of a
different region number, or unplayable or restricted (*1)
discs, an error message will appear on the TV display
and the disc will not play.
(*1) Viewing is prohibited on some DVDs according to the
audience age.
Notes:
●
During disc initialisation, the volume cannot be adjusted.
●
Stop positions may be recorded on some discs. When
you play such a disc, playback stops there.
●
During an operation, "
the operation is disabled by the disc.
●
The main unit detects loaded discs automatically and
then the indicators light up.
■ To resume playback after stopping
(resume play)
You can resume playback from the point playback is
stopped.
1
Whilst a disc is playing, press the
The system stores the point you stopped.
2
To restart play, press the
Play resumes from the point you stopped.
To cancel the resume playback:
Press the ( ) button twice.
Notes:
●
The resume playback feature is disabled on some
discs.
●
Depending on the disc, playback may resume from
slightly before the stopped position.

■ DVD mode operation indicators

The following are examples of operation indicators that
appear during DVD playback.
Operation
When the
power is on
without a disc.
Disc data is
/
being read.
Stop
Play
Pause
16
( ) button, a screen saver appears
" may appear indicating that
( ) button.
/ ( / ) button.
TV screen Unit display
TITLE TRK PRESET CHP
NO DISC
TITLE TRK PRESET CHP
LOADING
PROG SLEEP REPEAT 1 A - B
KHz
MHz
PROG SLEEP REPEAT 1 A - B
KHz
MHz