Polling (Requesting A Fax Transmission) - Sharp UX-B30 Operation Manual

Polling (Requesting a Fax Transmission)

Polling allows you to call another fax machine and have it send a document
(previously loaded in its feeder) to your machine without assistance from the
operator of the other machine.
Hint: Polling is useful when you want the receiving fax machine, not the
transmitting fax machine, to bear the cost of the call.
♦
To use the polling function, the other machine must be capable of being
polled.
♦
Before polling, make sure the other machine is set up to receive your
polling request.
♦
Your machine is not capable of being polled.
1
Dial the fax machine that you wish to poll using one of the following
methods:
•
Enter the full number using the numeric keys.
•
Pick up the handset (or press
answerback tone.
•
Press
the display.
2
Press .
•
If you used the handset, replace it when POLLING appears in the display.
Reception will begin.
or until the name (or number) of the other party appears in
Polling (Requesting a Fax Transmission)
) and dial the full number. Wait for the fax
79