Honda 2008 Pilot Owner's Manual page 265

3. Pull the burned out bulb straight
out of its socket.
Push the new bulb straight into
the socket until it bottoms.
4. Insert the socket back into the
light assembly. Turn it clockwise
to lock it in place.
5. Turn on the lights to make sure
the new bulb is working.
6. Reinstall the back-up light cover.
Replacing the High-mount Brake
Light
SCREWS
1. Place a cloth on the middle edge
of a part of the lens on the
passenger's side. Remove a part of
the lens by carefully prying on its
edge with a small flip tipped
screwdriver.
2. Use a Phillips-head screwdriver to
remove the screw under the lens.
Lights
BULB
SOCKET
3. Pull the light assembly out of the
tailgate.
4. Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
5. Pull the bulb straight out of its
socket. Push a new bulb into the
socket until it bottoms. Reinstall
the assembly.
259