Honda 2008 Pilot Owner's Manual page 264

Lights
Replacing Rear Bulbs
SCREW
SCREW
1. Open the tailgate.
2. Remove the two screws, then pull
the rear light assembly straight
back to remove it from the body.
258
BULB
SOCKET
3. Remove the socket of the burned
out bulb by turning it one-quarter
turn counterclockwise, and pull it
straight out of its socket.
4. Install a new bulb into the socket,
and reinstall the socket into the
light assembly.
Replacing a Back-up Light Bulb
BULB
SOCKET
1. Open the tailgate. Place a cloth on
the edge of the cover. Remove the
covers by carefully prying on the
edge with a small flat-tip
screwdriver.
2. Remove the socket by turning it
one-quarter turn counterclockwise.