Honda 2008 Pilot Owner's Manual page 132

Playing the XM Satellite Radio
TUNE Turn the TUNE knob left
or right to select channels. In the
category mode, you can only select
channels within that category.
SEEK/SKIP (CATEGORY)
Press either side of the CATEGORY
bar ( or ) to select another
category.
SCAN The scan function gives
you a sampling of all channels while
in the channel mode. In the category
mode, only the channels within that
category are scanned. To activate
scan, press the SCAN/RPT button or
touch the SCAN icon on the audio
display. The system plays each
channel in numerical order for a few
seconds, then selects the next
channel. When you hear a channel
you want to continue listening to,
press the button or touch the icon
again.
126
Preset You can store up to 12
preset channels using the six preset
buttons or preset icons on the audio
display. Each button stores one
channel from the XM1 band and one
channel from the XM2 band.
To store a channel:
1. Press the XM button. Either XM1
or XM2 will show in the display.
2. Use the TUNE knob, the
CATEGORY bar, or the SCAN
buttons to tune to a desired
channel.
In category mode, only channels
within that category can be selected.
In channel mode, all channels can be
selected.
3. Pick a preset number (icon) you
want for that channel. Press and
hold the bar (icon) until you hear a
beep.
4. Repeat steps 2 and 3 to store the
first six channels.
5. Press the XM button again or
touch the other XM icon (XM1 or
XM2) on the audio display. Store
the next six channels using steps 2
and 3.
Once a channel is stored, press and
release the proper preset button
(icon) to tune to it.