Label Decoration - Fisher-Price JEEP WRANGLER 74020 Owner's Manual & Assembly Instructions

G
Proper label application will help to keep the labels looking
their best! When applying labels, keep the following
guidelines in mind:
• Wash your hands before applying the labels.
• Before applying the labels, wipe the surface of the vehicle
with a clean, dry cloth to remove any dust or oils.
• Place the labels exactly as shown in the illustrations.
• For best results, avoid repositioning a label once it has
been applied to the vehicle.
• After applying a label, rub the label firmly with a clean,
dry cloth to make sure the label is adhered to your
vehicle. Start at the center of a label, and smooth
towards the outer edges to remove air bubbles.
8
Jeep and the Jeep grille design are registered trademarks of
DaimlerChrysler Corporation and are used under license.
©DaimlerChrysler Corporation.
23
®
10
Back View
26
14
22
*7
21
31
15
*Apply label 7 before
applying label 31

Label Decoration

29
27 18
®
2
22
28
20
21
Right Side View
17
22
21
*Apply label 1 before
applying label 31
One-time assembly is now complete.
IMPORTANT NOTES:
• Please carefully read the owner's information in this
manual and teach your child about proper vehicle opera-
tion and rules for safe driving before allowing operation
of this vehicle.
• For safety reasons, your vehicle has been pre-set so that
it will only operate at low speed (2
Make sure that your child can safely operate this vehicle
at low speed before removing the high speed lock-out
screw to allow operation of the vehicle at high speed
(5 mph, maximum).
To disconnect high speed lock-out,please see page 23.
28
19
®
18
15
*1
Left Side View
1 / mph, maximum).
2
9
22
21
31