Label Decoration; Attaching The Seat - Fisher-Price Barbie Grow-With-Me Trike 72668 Instructions Manual

Label Decoration

Label Decoration
6
10
(Place remaining labels
on opposite side.)
10
Proper label application will help to keep the labels
looking their best!
• Wash your hands before applying the labels.
• Make sure the areas where the labels will be applied are
clean and dry. Wipe your vehicle with a clean, soft, dry
cloth to remove any dust or oils.
• For best results, avoid applying a label more than once.
• Apply the labels as shown in the illustration above.
• After applying a label, rub the label firmly with a cloth to
make sure the label is adhered to your vehicle.
4
5
(Place the other
1
label
opposite side.)
2
7
(Place label
on opposite side.)
9
(Place label
on opposite fender.)
Hint: The seat can be attached to the frame in any of three
positions, depending on the size of your child. Check your
child's fit on the BARBIE
the seat to pedal distance, as it is being ridden. If the pedals
seem too far away or too close for your child, move the seat
up or down.
3
Seat
on
1
Seat
Retainer
8
Lower Position
• At an angle, insert the tabs on the seat into any of the top
three sets of slots for the lower, middle or upper position.
• Lower the seat so that the seat retainer inserts and snaps
into the slots in the frame.
• Pull up on the seat to be sure it is secure.
7

Attaching the Seat

Attaching the Seat
TM Grow-With-Me Trike by observing
Tabs
Slots
Middle Position Upper Position