Table of Contents
Advertisement
E
Charger Connector
1
• Squeeze the connector tabs on the charger connector and plug it into
the battery connector.
IMPORTANT! If you are recharging your battery, you will first need to
lift the hood and remove the battery retainer (pretend engine cover).
Disconnect the battery connector from the motor harness connector.
8
BATTERY CHARGING
Battery Connector
2
• Plug the charger into a standard wall outlet.
Note: If power flow to the wall outlet is controlled by a switch, make
sure the switch is "ON".
• Before first-time use, charge the battery for at least 18 hours.
Never charge the battery longer than 30 hours.
• Recharge the battery for at least 14 hours after each use of your
vehicle. Do not charge the battery longer than 30 hours.
• Once the battery is charged, disconnect the charger connector from
the battery connector. Unplug the charger from the wall outlet. The
battery is now ready to be installed in your vehicle. Please see the
Battery Installation section on page 16 for detailed instructions on
installing your battery.
J0713pr-0920
Advertisement
Table of Contents
