Lowrance HDS series Installation Manual page 11

Bezel Removal
1:
To removing the bezel from the 5 and 7-inch models the card slot door must be open
2:
To remove the bezel use a flat head screwdriver.
3:
Insert screwdriver into the bezel release slots and pry out and away from the unit. The
bottom of the bezel will release from the unit. Push up to release the top bezel catches.
For 8 and 10-inch models
1:
While pulling the lower left or right corner of the bezel toward the outside of the unit
2:
Push up towards the top of the unit to release the top bezel catches.
Note:
All models have four adhesive strips behind the bezel. These strips should be kept free
of dust and other foreign material when the bezel is not attached to the unit.
10