Bracket Mount - Lowrance HDS series Installation Manual

Navico
Table of Contents

Advertisement

Bracket Mount

An alternative to flush mounting the HDS display is to bracket mount the unit. This method
has the advantage that the display can be easily removed when not in use and may be tilted to
achieve the best possible viewing angle.
1:
Loosely screw securing knobs to the
Display unit.
3:
Make sure the display can be
adjusted to the correct angle without
interfering with the surrounding.
Allow space for cables attached to
the rear of the unit
5:
Drill a pilot hole for the four screws
and an optional hole large enough
for the cables to emerge from.
2:
Temporarily mount the display unit
in the bracket
4:
Remove the display unit and use the
mounting bracket as a template to
mark the four positions of the screw
holes and optional center cable hole.
6:
Secure the bracket to the surface
7:
Connect the cables.
12

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hds5Hds7Hds8Hds10

Table of Contents