Authorization - Siemens SICLOCK TC100 Operating Instructions Manual

Plant central clock

Table of Contents

Configuration Tool

7.2.2

Authorization

There are authorization levels for each parameter, which allow or forbid read and

write accesses to the parameter. The operator interface initially starts with the

lowest authorization level, which mostly only allows read access to parameters.

You obtain more rights by inputting the corresponding password.

The user can change the password.

Parameter /System/Authorization For Standard Protection (2.06.02)

Note

The combination "0000" is not permitted as a password. Setting the password to

"0000" disables access with this authorization level. Access is then only possible

using the service password. The service password can be requested from Tech-

nical Assistance by an authorized person.

The device is supplied with the password: "2222"

The current authorization level is indicated by the color of the password field.

Write protection - red entry field

In this authorization level, the user typically has only read access to standard

parameters.

Standard protection - green entry field

In this authorization level, the user typically also has read access to extended

parameters and write access to standard parameters.

Online mode

Authorization is executed directly on the device, i.e. the device assigns an appro-

priate authorization level.

Offline mode

You can authorize yourself for a higher authorization level with a password, pro-

vided that it is included in the loaded offline authorization parameters.

Note

In offline mode, it is not possible to authorize oneself with a password that is pre-

sent in the device but is not included in the offline authorization parameters.

SICLOCK

TC100 Operating Instructions

Table of Contents