Siemens SICLOCK TC100 Operating Instructions Manual page 46

Working with the Configuration Tool
How to start the Configuration Tool:
1. Open the Web browser
2. Enter the address of the device port, e.g. 192.168.1.10
3. If necessary, confirm the installation and execution of the applet with "Yes"
and/or "Always".
The Configuration Tool is started and displayed in the browser.
Note
Take note of the information in your browser concerning restrictions as a result of
high security settings.
How to assign parameters to the SICLOCK TC100 with the Configuration
Tool:
1. Connect the Configuration Tool to the SICLOCK TC100 with the button
2. In the case of a new assignment of parameters to the device, load the para-
meters into the Configuration Tool with the
parameter file (*.u600) with the button
3. Assign parameters to the SICLOCK TC100 according to your hardware con-
figuration and requirements.
In online mode, changes become immediately effective in the device.
4. Back up the configuration as a parameter file (*.u600) on your PC with the
Note
In order to be able to fall back on the last version of the SICLOCK TC100 para-
meter assignment, we recommend backing up the current parameter assignment
of SICLOCK TC100 as a *.u600 file before you make any changes.
Siemens AG 2010 All Rights Reserved
®
SICLOCK TC100 Operating Instructions
button.
Configuration Tool
button, or open an existing
.
7-4