Table of Contents
Advertisement
Front Axle
Button End
Handlebar
Guides
Assembly
Round
Cap
Bushing
Nut
Connector
End
Handlebar
Wire
Rectangular
Harness
Opening
Handlebar
Wire Harness
Handlebar
12
4
• Slide a round bushing onto the
front axle and press it into the
center of the front wheel.
• Fit a cap nut onto the end of the
front axle.
• Tap the cap nut with a hammer
to secure it on the front axle.
• Repeat assembly steps 3 and 4 to
assemble the other front wheel to
the other side of the front axle.
• Position the vehicle body upright.
5
• Insert the connector end of the
handlebar wire harness into the
rectangular opening in the
handlebar.
• Feed the handlebar wire harness
through the handlebar.
• Push firmly on the button end of
the handlebar wire harness to
snap it into the rectangular
opening.
6
• Turn the handlebar upside down.
• Align the handlebar wire harness
with the guides on the underside
of the handlebar.
• Push firmly on the handlebar
wire harness near each of the
guides to secure the wire in the
underside of the handlebar.
Advertisement
Table of Contents
