Seagate DB35.2 Serial ATA Product Manual page 15

Table 3: Drive specifications for 160, 120, and 80 Gbyte models
Drive specification
Altitude, nonoperating
(meters below mean sea level, max)
Shock, operating (max at 2 msec)
Shock, nonoperating (max at 2 msec)
Vibration, operating
Vibration, nonoperating
Drive acoustics, sound power (bels)
Idle** (bels)
Operational, CE seeks (bels)
Operational, PVR seeks (bels)
Nonrecoverable read errors
Annualized Failure Rate (AFR)
Warranty
Contact start-stop cycles
(25°C, 50% relative humidity)
Supports hotplug operation per Serial ATA Revision 2.5
specification
*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment
and formatting.
**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and
power to operational levels.
DB35.2 Serial ATA Product Manual, Rev. C
ST3160212SCE ST3120213SCE
–60.96 m to 12,192 m
+
(–200 ft to 40,000 ft)
63 Gs
350 Gs
5-22 Hz: 0.25 Gs, Limited displacement
22-350 Hz: 0.5 Gs
350-500 Hz: 0.25 Gs
5-22 Hz: 0.25 Gs, Limited displacement
23-350 Hz: 5.0 Gs
351-500 Hz: 1.0 Gs
2.48 (typical) 2.46 (typical
2.64 (max) 2.65 (max)
2.65 (typical) 2.57 (typical
2.95 (max) 2.64 (max)
2.53 (typical) 2.50 (typical
2.62 (max) 2.57 (max)
14
1 per 10 bits read
0.70%
5 years on distribution units.
To determine the warranty for a specific drive, use a web browser to
access the following web page:
www.seagate.com/support/service/
From this page, click on the "Verify Your Warranty" link. You will be
asked to provide the drive serial number, model number (or part num-
ber) and country of purchase. The system will display the warranty infor-
mation for your drive.
50,000
Yes
ST3802110SCE
2.43 (typical
2.51 (max)
2.61 (typical)
2.63 (max)
2.45 (typical)
2.51 (max)
9