Seagate DB35.2 Serial ATA Product Manual page 13

Table 2: Drive specifications for 300, 250 and 200 Gbyte models
Drive specification
Altitude, nonoperating
(meters below mean sea level, max)
Shock, operating (max at 2 msec)
Shock, nonoperating (max at 2 msec)
Vibration, operating
Vibration, nonoperating
Drive acoustics, sound power (bels)
Idle** (bels)
Operational, CE seeks (bels)
Operational, PVR seeks (bels)
Nonrecoverable read errors
Annualized Failure Rate (AFR)
Warranty
Contact start-stop cycles
(25°C, 50% relative humidity)
Supports hotplug operation per Serial ATA Revision 2.5
specification
*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment
and formatting.
**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and
power to operational levels.
DB35.2 Serial ATA Product Manual, Rev. C
ST3300822SCE ST3250824SCE
–60.96 m to 12,192 m
+
(–200 ft to 40,000 ft)
63 Gs
350 Gs
5-22 Hz: +/-0.25", Displacement limited
22-350 Hz: 0.5 Gs
350-500 Hz: 0.25 Gs
5-22 Hz: +/-0.25", Displacement limited
22-350 Hz: 5.0 Gs
350-500 Hz: 1.0 Gs
2.67 (typical)
2.82 (max)
2.80 (typical)
2.90 (max)
2.68 (typical)
2.80 (max)
14
1 per 10 bits read
0.70%
5 years on distribution units.
To determine the warranty for a specific drive, use a web browser to access
the following web page:
www.seagate.com/support/service/
From this page, click on the "Verify Your Warranty" link. You will be asked
to provide the drive serial number, model number (or part number) and
country of purchase. The system will display the warranty information for
your drive.
50,000
Yes
ST3200827SCE
7