Table of Contents
Advertisement
9
Seat Belt Straps
Second
T-tab
• Make sure the two seat belt straps are fastened
together. If they are not fastened together, connect the
fasteners to form one seat belt.
• Insert the T-tab at one end of the seat belt through the
slot in one arm of the seat. Do not pull the second
T-tab through the slot.
• Repeat this procedure to secure the other end of the
seat belt in the seat.
• Pull up on the seat belt to make sure it is securely
attached to the seat.
10
Seat
• Insert the two tabs on the bottom of the seat into the
slots in the vehicle body.
Second
T-tab
Bottom
T-tab
Seat
Tabs
Slots
Assembly
11
Slot
Please Note: The seat can be assembled in either of two
positions for your child's comfort.
• Push down on the center of the seat and slide it toward
the rear of the vehicle.
• Align the screw holes in the back of the seat with the
first or second set of holes in the vehicle body.
• Check your child's fit in the vehicle by observing foot to
pedal distance and adjust the position of the seat, if
necessary.
• Insert two #8 x 1" screws through the holes in the
back of the seat and into the holes in the vehicle body,
as shown.
• Insert two #8 x 1" screws through the holes in the arm-
rests and into the vehicle body, as shown.
• Tighten the screws with a Phillips screwdriver. Do not
over-tighten.
11
Push
Here
First
Position
Second
Position
Advertisement
Table of Contents
