Table of Contents
Advertisement
Users should use caution exposing any electronic components to uncontrolled chemical pollutants and corro-
sive chemicals as electronic drive component reliability can be affected by the installation environment. The sil-
ver, copper, nickel and gold films used in Seagate products are especially sensitive to the presence of sulfide,
chloride, and nitrate contaminants. Sulfur is found to be the most damaging. In addition, electronic components
should never be exposed to condensing water on the surface of the printed circuit board assembly (PCBA) or
exposed to an ambient relative humidity greater than 95%. Materials used in cabinet fabrication, such as vulca-
nized rubber, that can outgas corrosive compounds should be minimized or eliminated. The useful life of any
electronic equipment may be extended by replacing materials near circuitry with sulfide-free alternatives.
6.4.8
Electromagnetic susceptibility
See Section 2.1.1.1.
6.5
Mechanical specifications
Refer to Figure 10 for detailed physical dimensions. See Section 8.3, "Drive mounting."
Height:
1.028 in
Width:
4.010 in
Depth:
5.787 in
Weight:
ST3450856SS: 1.563 pounds
ST3300656SS: 1.53 pounds
ST3146356SS: 1.487 pounds
36
26.11 mm
101.85 mm
146.99 mm
0.709 kilograms
0.694 kilograms
0.674
Cheetah 15K.6 SAS Product Manual, Rev. A
Advertisement
Table of Contents
