Control Mode Controls; Screen Options; Automation Transport Controls; Options Menu - Lexicon 960L Owner's Manual Addendum

Automation Package Addendum

CONTROL MODE CONTROLS

Figure 7 shown on page 9 provides a general
map of Control Mode controls. It is similar to
the Control Mode portion of the map that
appears in the 960L Owner's Manual, except
that automation controls have been added.
CONTROL
Represents the CONTROL button on the
LARC2. Press to enter Control Mode.
WORDCLK
Represents soft buttons that appear on the soft
row at the bottom of the LARC2 display.
48K INT
Represents screen option soft buttons that can
be accessed by pressing the >>OPTIONS soft
button on the soft row at the bottom of the

LARC2 display.

1 - System Information
2 - System Licenses
Represents menu options that can be accessed
by pressing the associated soft button.
!
Appears on all soft buttons that access menu
options when pressed.

SCREEN OPTIONS

Rectangles with rounded corners and dashed
outlines represent screen options. When
screen options are available for the current
screen, the >>OPTIONS soft button appears
on the soft row at the bottom of the LARC2
display. Press this button once to open the
screen options soft row. Press this button again
to close the screen options soft row and open
the previously displayed soft row.
8
When the screen options soft row is open, the
arrows on the >>OPTIONS soft button point
to the left (<<OPTIONS). When the screen
options soft row is closed, the arrows on the
>>OPTIONS soft button point to the right.
AUTOMATION TRANSPORT
CONTROLS
When automation is running, the Automation
Transport Controls (Figure 20, page 24) are
available on all screens. When no screen
options are available for the current screen,
the >>AUTO soft button appears on the soft
row at the bottom of the LARC2 display. Press
this button once to open the Automation
Transport Controls. Press this button again to
close the Automation Transport Controls and
open the previously displayed soft row.
When the Automation Transport Controls are
open, the arrows on the >>AUTO soft button
point to the left (<<AUTO). When the
Automation Transport Controls are closed, the
arrows on the >>AUTO soft button point to
the right.

OPTIONS MENU

The Options Menu shown in Figure 6 (below)
is available when both screen options and
Automation Transport Controls are available
for the current screen. To access the Options
Menu, press the >>OPTIONS or >>AUTO
soft button twice in succession.
Figure 6: Options Menu
. . . OPTIONS MENU continues on page 10
Lexicon