Operation Panel - SATO LM400e Series Quick Manual

Operation Panel

Instructions and error messages are displayed in alphanumeric.
DIP switch
Sets the operational parameters of printer
Adjustments
Can be used for adjustment when servicing.
Do not use this volume unless otherwise instructed.
PRINT : Adjusting print darkness
OFFSET: Adjusting tear-off position
PITCH : Adjusting home position of the label
Display panel
Displays an error message and
instructions, etc.
key
Toggles the printer between on-line and
off-line mode for print start/stop and for
transmitting/receiving data.
key
Feeds the label.
Press once to feed one blank label.
*When turning the power ON, or when the label is
not at the right position after setting the label,
press the FEED key to adjust the label position.
STATUS
Indicates the printer status.
Green: Enabled for print and data communication
Red: An error occurred.
Off: Disabled for print and data communication
8