Advertisement
Quick Links
Advertisement
Related Manuals for Fisher-Price L3891
Summary of Contents for Fisher-Price L3891
- Page 1 L3891 IMPORTANT! KEEP INSTRUCTIONS FOR FUTUREREFERENCE. www.fisher-price.com.au...
-
Page 2: Consumer Information
This package contains small parts in its unassembled state. Adult assembly is required. Consumer Information IMPORTANT! Place the high chair on a level, stable surface away from electrical flexes. Be sure to keep electrical flexes out of child's reach. • Please read these instructions before assembly and use of this product. - Page 3 Parts Seat Back Frames Seat Bottom Back Base Front Base Hinge Rod Seat Bottom Tubes Footrest Food Tray Base Tray Teether Toy Note: Tighten or loosen all screws with a Phillips screwdriver. Do not over-tighten the screws. #10 x , cm Black Screws - 7 #8 x 1,9 cm Screws - 8 Shown Actual Size...
- Page 4 IMPORTANT! Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Mattel for replacement parts and instructions if needed. Never substitute parts. •...
- Page 5 Insert Screws Here • Insert two #10 x 2,2 cm black screws through the footrest and into the seat bottom. Tighten the screws. Slot • Turn the seat bottom assembly upright. • Fit the seat back pins into the slots in the top side of the seat bottom assembly.
- Page 6 Frame Decorated Side Screw Retainers • Position a frame so that the decorated side is outward. • Insert the back frame legs into the back base. • Fit a screw retainer over a hole in the back base, as shown. •...
- Page 7 Screw Retainers Front Base • Fit the frame front legs onto the front base. • Fit a screw retainer over the hole in a front leg. • Insert a #10 x 2,2 cm black screw through the screw retainer and front leg. Tighten the screw. •...
- Page 8 Assembly Shoulder Straps Crotch Strap • Fit the pocket on the top of the pad onto the seat back. • Remove both shoulder straps from the seat back. • Remove the crotch strap from the seat back.
- Page 9 Clips • Fit the clips on the front edge of the pad onto the seat bottom. • Hook the elastic loops on each side of the pad onto the tabs in the seat back. Assembly Shoulder Straps up Crotch Strap Down Hint: Do not unbuckle the restraint system.
- Page 10 Smaller Baby • Insert the ends of the shoulder straps through the lower slots in the pad. • From behind the product, attach the ends of the shoulder straps to the peg. Assembly Larger Baby • From the front of the product, insert the ends of the shoulder straps through the upper slots in the pad and seat back.
- Page 11 WARNING Prevent serious injury or death from falls or sliding out: Always use the restraint system for the upright and reclined positions of the seat. Adjust restraint to fit your child snugly. The tray is not designed to hold the child in the chair. Waist/Shoulder Belt Crotch Belt • Place your child in the seat. Position the crotch belt between your child’s legs. • Fasten both waist/shoulder belts to each side of the crotch belt.
- Page 12 • From the front of the high chair, pull the shoulder portions of the restraint system out and then fit them back through the desired shoulder strap slots in the seat pad and in the seat back.
- Page 13 WARNING Prevent serious injury or death from falls or sliding out: Always use the restraint system for the upright and reclined positions of the seat. Adjust restraint to fit your child snugly. The tray is not designed to hold the child in the chair. Armrest • While pulling the latches underneath the tray out, slide it onto the armrests. Release the latches to secure the tray in place. Hint: Before use, thorougly wash all parts (the trays) that may contact food.
-
Page 14: Using The Brakes
using the Trays • Fit the food tray into the base tray, as shown. Hint: Before use, thorougly wash all parts (the trays) that may contact food. The food tray is not microwave safe. • Insert and “snap” the toy tab into either slot in the tray. Hint: To remove the toy, press the tab and lift the toy. -
Page 15: Adjusting The Seat
WARNING Prevent serious injury or death from falls or sliding out: • A lways use the restraint system for the upright and reclined positions of the seat. Adjust restraint to fit your child snugly. The tray is not designed to hold the child in the chair. • I t is recommended that only children capable of sitting upright unassisted use the upright position of the high chair. Semi-Recline Recline Hint: Adjust the seat angle to any of three positions: Upright, Semi-Recline or Recline. To adjust the seat angle: •... - Page 16 ©2006 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, New York 14052, U.S.A. • The pad, frame, and base tray may be wiped clean using a mild cleaning solution and a damp cloth.