Advertisement
Quick Links
Advertisement
Related Manuals for Fisher-Price L0542
Summary of Contents for Fisher-Price L0542
- Page 1 L0542 IMPORTANT! KEEP INSTRUCTIONS FOR FUTURE REFERENCE. www.fi sher-price.co.uk...
-
Page 2: Consumer Information
Adult assembly is required. Consumer Information IMPORTANT! Place the high chair on a level, stable surface away from electrical flexes. Be sure to keep electrical flexes out of child's reach. • Please read these instructions before assembly and use of this product. - Page 3 Assembled Parts 2 Frames Seat Back Seat Bottom 2 Bases Footrest 2 Seat Bottom Tubes Food Tray Hinge Rod Base Tray Teether Toy Note: Tighten or loosen all screws with a Phillips screw- driver. Do not over-tighten the screws. #8 x 1,9 cm Screws – 8 #10 x 2,2 cm Black Screw –...
- Page 4 IMPORTANT! Before assembly and each use, inspect this prod- uct for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Mattel for replacement parts and instructions if needed. Never substitute parts. •...
- Page 5 Insert Screws Here • Insert two #10 x 2,2 cm black screws through the footrest and into the seat bottom. Tighten the screws. This may require extra force. Seat Back Pin Slot • Turn the seat bottom assembly upright. • Fit the seat back pins into the slots in the top side of the seat bottom assembly.
- Page 6 Frame Leg Frame Decorated Side Screw Retainers • Pull the frame leg out on each frame to open. Make sure it "clicks" into place. • Position a frame so that the decorated side is outward. • Fit the end of a base into the back leg of a frame. •...
- Page 7 Base • Insert the frame front legs onto the remaining base. • Fit a screw retainer over a hole in the front leg. • Insert a #10 x 2,2 cm black screw through the screw retainer and front leg. Tighten the screw. •...
- Page 8 Seat Bottom Tube Ends Seat Height Adjusters • Push each seat height adjuster to be sure they are completely on the seat bottom tubes. • Insert a #8 x 1,9 cm screw through each seat height adjuster and the ends of the seat bottom tube. Tighten the screws. This may require extra force.
- Page 9 Clips • Fit the clips on the front edge of the pad onto the seat bottom. • Hook the elastic loops on each side of the pad onto the tabs in the seat back. Assembly Shoulder Straps Up Crotch Strap Down Hint: Do not unbuckle the restraint system.
- Page 10 Smaller Baby • Insert the ends of the shoulder straps through the lower slots in the pad. • From behind the product, attach the ends of the shoulder straps to the peg. Assembly Shoulder Straps Larger Baby • From the front of the product, insert the ends of the shoulder straps through the upper slots in the pad and seat back.
- Page 11 WARNING Prevent serious injury or death from falls or sliding out: The child should at all times wear a safety harness correctly fitted and adjusted. The tray is not designed to hold the child in the chair. Waist/Shoulder Belt Crotch Belt •...
- Page 12 • From behind the product, squeeze the restraint release tabs and remove the shoulder straps. • From the front of the high chair, pull the shoulder portions of the restraint system out and then fit them back through the desired shoulder strap slots in the seat pad and in the seat back.
- Page 13 WARNING Prevent serious injury or death from falls or sliding out: The child should at all times wear a safety harness correctly fitted and adjusted. The tray is not designed to hold the child in the chair. • Fit the base tray onto the seat armrests. Push down until the base tray "snaps"...
- Page 14 Using the Trays • Fit the food tray into the base tray, as shown. Hint: Before use, thorougly wash all parts (the trays) that may contact food. The food tray is not microwave safe. Using the Teether Toy Food Tray Base Tray •...
-
Page 15: Adjusting The Seat
Prevent serious injury or death from falls or sliding out. It is recommended that only children capable of sitting upright unassisted use the high chair in the upright position. Hint: Adjust the seat angle to any of three positions: Upright, Semi-Recline or Recline. - Page 16 ©2010 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, New York 14052, U.S.A. • The pad, frame and base tray may be wiped clean using a mild cleaning solution and a damp cloth.