Advertisement
Assembly
Seat Back
Pin
Opening
Seat
Bottom
Assembly
5
• Turn the seat bottom assembly upright.
• Fit the seat back pins into the openings in the top side of
the seat bottom assembly.
Hinge
6
• Turn the seat assembly face down.
• Insert the hinge rod through the hinge on the seat back
and seat bottom, as shown.
7
• Insert a #10 x
/
" black screw into the hinge rod.
8
• Tighten the screw with a Phillips screwdriver.
Do not over-tighten.
• Set the seat assembly aside for Assembly step 11.
Seat Back
Pin
Opening
7
#10 x
/
" Black Screw
8
SHOWN ACTUAL SIZE
Hinge Rod
5
Frame Leg
7
• Pull the frame leg out on each frame to open. Make sure it
"clicks" into place.
Short Leg
Tube
Back Base
Long
Tapered
Leg Tube
8
Front Base
• Identify the back and front base. The back base has short leg
tubes and the front base has long, tapered leg tubes. You will
use the back base for the next assembly step.
Advertisement
