• It is recommended that only children capable of sitting upright unassisted use the high chair in the upright position. • Always keep child in view while using the high chair. • Never leave child unattended.
Page 3
Parts Food Tray Footrest Snack Tray Seat Back with Shoulder and Waist Belts 2 Front Legs 2 Back Legs Seat Bottom with Crotch Belt 2 Seat Brackets Back Base Front Base Seat Pad Allen Wrench M4 x 17mm Screw – 6 M5 x 60mm Screw –...
Page 4
IMPORTANT! Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Fisher-Price for replacement parts and instructions if needed. Never substitute parts.
Page 5
Front Leg • Position a front leg so that it curves up and fit it into the small socket in the seat bottom. Hint: If the leg does not seem to fit into the seat bottom, try the other front leg. •...
Back Base M6 x 28mm Screws M6 x 28mm • Fit the back base onto the bottom of both back legs, as shown. • Insert two M6 x 28mm screws into each back leg and tighten. M6 x 28mm Screws Front Base Front Legs •...
Page 7
Seat Back Holes • At an angle, fit the pegs on each side of the seat back into the holes in the sides of the seat bottom. Hint: You may need to flex the bottom edge of the seat back to fit the seat back pegs into the holes in the seat bottom.
Page 8
M4 x 17mm Screws • Fit the other seat bracket to the other side of the seat bottom, as shown. • Insert two M4 x 17 mm screws and tighten. • Unbuckle the lower restraint. Assembly Seat Bracket Shoulder Belt Hint: The shoulder belts come assembled to the seat back in the lower position for a smaller child.
Page 9
Elastic Loops Slots • Fit the elastic loops on the seat pad down through the slots in the footrest. Pegs BACK VIEW • Fit the elastic loops on the seat pad bottom onto the pegs on the footrest. Assembly Shoulder Belts •...
• It is recommended that only children capable of sitting upright unassisted use the high chair in the upright position. • Always keep child in view while using the high chair. • Never leave child unattended.
Page 11
• Tighten each waist belt/shoulder belt so that the restraint system is snug against your child. Please refer to the next section for instructions to tighten the waist belts/shoulder belts. Securing Your Child Adjuster • To tighten the waist belts: Feed the anchored end of the waist belt up through the buckle to form a loop the waist belt •...
Page 12
• Unbuckle the restraint system. Shoulder Belts • To adjust the restraint height for baby, push to remove the shoulder belts from the seat back. Securing Your Child Shoulder Belts Restraint System Larger Baby • Insert the ends of the shoulder belts through the upper slots in the pad and seat back.
PULL Adjusting Seat Height • Pull the levers on both seat height adjusters and lift or lower the seat to any of five different heights. • Make sure both sides of the seat are adjusted to the same height. • Push the seat bottom to be sure the seat is secure.
Page 14
Hint: Before use, thoroughly wash all parts (the trays) that may contact food. The snack tray is not dishwasher safe. Armrests Snack Tray • Slide the snack tray onto the seat armrests. Push the snack tray until it "snaps" into place. Food Tray •...
Page 15
Storage • Push down on the levers on the back legs. • Then, push the back legs in towards the front legs. • The snack tray, seat and restraint straps may be wiped clean using a mild cleaning solution and damp cloth. Do not use bleach. Do not use harsh or abrasive cleansers.