Problem Solving - Sanitaire S3530 Series Owner's Manual

PROBLEM SOLVING

NOTE: Turn OFF the power switch and unplug the electrical cord before servicing.
PROBLEM
Motor won't start
No suction at end of
hose
Reduced suction
Cleaner shuts off
General questions
10
CAUSE
Electric plug
Power switch not
turned "ON"
Full paper bag
Hose
Front cover not
latched
Full paper bag
Slip ring open
Hose
Rotate On/Off
Button
Thermal Cut-Off
Assembly or
related questions.
SOLUTION
Push plug securely into
outlet.
Try another outlet.
Check circuit breaker.
Make sure power switch is
"ON."
Replace paper bag.
Remove any clogs from
hose that restrict airflow,
then try again.
Push front cover until it
latches firmly.
Replace paper bag.
Rotate slip ring on wand
until hole is covered.
Remove any clogs from
hose that restrict airflow,
then try again.
Rotate to increase suction.
See instructions on page 4.
Call 1-800-282-2886
between 8:00 AM–7:30
PM (CST) Monday-Friday,
10:00AM to 6:30PM
Saturday. Know the Model
number and serial number
when you call.