Problem Solving - Sanitaire S3680 Series Owner's Manual

PROBLEM SOLVING

NOTE: Turn OFF the power switch and unplug the electrical cord before servicing.
PROBLEM PROBLEM PROBLEM PROBLEM
Motor won't start
No suction at end of
hose
Reduced suction
Cleaner shuts off
General questions
6
CAUSE CAUSE CAUSE CAUSE
✓ ✓
Electric plug
✓ ✓
Power switch not
turned "ON"
✓ ✓
Full paper bag
✓ ✓
Hose
✓ ✓
Front cover not
latched
✓ ✓
Full paper bag
✓ ✓
Slip ring open
✓ ✓
Hose
✓ ✓
Internal safety
thermostat trips
✓ ✓ Cord connection at
hose
✓ ✓
Assembly or related
attachments
SOLUTION SOLUTION SOLUTION SOLUTION
Push plug securely into outlet.
Try another outlet.
Check circuit breaker.
Make sure power switch is "ON."
Replace paper bag.
Remove any clogs from hose that
restrict airflow, then try again.
Push front cover until it latches
firmly.
Replace paper bag.
Rotate slip ring on wand until hole
is covered.
Remove any clogs from hose that
restrict airflow, then try again.
Unplug cleaner and check for
obstructions in hose, wands and
attachments.
Check for full paper bag.
Clean/replace motor filter.
Check powerhead and hose plugs
for proper connection.
Call 1-800-800-8975 between
8 am to 7:30 pm Monday - Friday,
and 10 am to 6:30 pm Saturday,
CST.
Know the model number and
serial number when you call.