Using The Tape Counter - Samsung DVD-V6700 User Manual

4
When an Index mark is found the DVD-VCR
will playback the tape for 5 seconds, after
which it will continue searching for the next
Index mark
INTRO SCAN : ¦¦
5
If you want to watch the tape from a
particular Index, press the ‹
Index Skip Search
This feature will enable you to fast
forward/rewind to a specific point on a tape: e.g.
If you have recorded 3 different programmes on
a tape and you have rewound the tape to the
beginning, by using this feature you can go
directly to the start of programme 2 simply by
pressing the SEARCH button.
1
Press the SEARCH button.
The VCR Function menu is displayed.
Press the œorƒ¤button to select Intro Scan.
Go To [0:00:00]
SETUP
End Search
DVD
Intro Scan
VCR
PROG
FUNC
OK
2
Press the OK or ‹ button.
3
Press the ¦¦ or ‹‹ button twice more.
4
These Index searches can be made forwards
(press the ‹‹ button) or backwards (press
the ¦¦ button).
(¦¦ -20 0
● ● ●
This will take you directly to the start of the
desired programme is located.
INDEX SEARCH : ¦¦ -06
To cancel an Index search simply press the
‹ll or ■ button.
30 - English
ll
button twice.
VCR Function
RETURN MENU
+20 ‹‹)
●

Using the Tape Counter

The tape counter:
• Indicates the elapsed time in the play and
record modes (Hours, Minutes and Seconds).
• Is reset when a cassette is inserted in the
DVD-VCR.
• Allows you to find the beginning of a sequence
easily.
• If the remaining time is to be calculated
correctly, you must indicate the type of
cassette being used.
1
Insert a cassette in your DVD-VCR.
To set the tape counter to zero at the begin-
ning of a sequence:
• Press the INFO button twice to display the
counter.
• Press the CLEAR button when you want to
set the tape counter to zero.
2
When you are ready,
• Start Playback or Recording.
• Press the ■ button.
• To fast-froward or rewind to the sequence at
which the counter was set to zero, press the
¦¦ or ‹‹ button.
• Some DVD-VCR information, such as the
counter, can be displayed on the television
screen (Unless you have deactivated the
Screen Messages mode; refer to page 22).
Press the INFO button:
• Once to display the current function,
programme number, recording speed, time
and counter.
• Twice to display the counter only.
• Three times to display the time remaining on
the cassette.
• Four times to clear the display.
0:00:00