Table of Contents
Advertisement
The following times are displayed for Voice and Data:
5.
• Last call: shows the length of time for the last call.
• Dialed calls: shows the total length of time for all calls made.
• Received calls: shows the total length of time for all calls received.
• All calls: shows the total length of time for all calls made and
received.
To reset these times to zero, press
6.
Options During a Call
Your phone provides a number of control functions that you can
use during a call.
Adjusting the Call Volume
To adjust the earpiece volume during a call, use the Volume keys
on the left side of the phone.
Press the Up volume key to increase the volume level and
press the Down volume key to decrease the volume level.
From the Home screen, you can also adjust the ringer volume
using these same keys.
In-Call Options
During an active call there are several functions available by
tapping a corresponding on-screen button.
Hold: place the current active call on hold.
•
38
•
•
•
•
then tap
Reset.
•
•
•
Add call: displays the dialer so you can call another person.
Keypad: displays the on-screen keypad, where you can enter
number using DTMF (Dual Tone Multi-Frequency).
End call: terminates the call.
Speaker: routes the phone's audio through either the speaker or through
the earpiece.
– Tap Speaker to route the audio through the speaker. (You can adjust the
speaker volume using the volume keys.) A green line will appear under
the Speaker button.
– Tap Speaker again to use the phone's earpiece (see "Using the
Speakerphone During an Active Call" on page 40.) The green line
turns grey when Speaker is not activated.
Mute: turn the onboard microphone either on or off.
– Tap Mute during a call to mute the microphone. A green line will appear
under the Mute button.
– Tap Mute again to unmute the microphone. The green line will turn grey
when Mute is not activated.
Headset: connects to a Bluetooth headset.
– Tap Headset during a call to activate a Bluetooth headset. A green line
will appear under the Headset button.
– Tap Headset again to de-activate the Bluetooth headset. The green line
will turn grey when the Headset is not activated.
Press
for more options:
– Contacts: opens your Contact list.
– Memo: allows you to jot down a memo during a call.
Advertisement
Table of Contents
