Table of Contents
Advertisement
requires access to a Wireless Access Point (WAP). The WAP can
either be Open (unsecured), or Secured (requiring knowledge of
the Router name and password).
Turning Wi-Fi On
By default, your device's Wi-Fi feature is turned off. Turning Wi-Fi
on allows your device to discover and connect to compatible in-
range WAPs.
From the Home screen, tap
1.
and network
Wi-Fi settings.
Tap Wi-Fi to activate the feature. A green checkmark
2.
indicates that Wi-Fi is active. The device scans for available
in-range wireless networks and displays them under Wi-Fi
networks on the same screen.
Connect to a Wi-Fi Network
From the Home screen, tap
1.
and network
Wi-Fi settings.
The network names and security settings of detected Wi-Fi
networks display in the Wi-Fi networks section.
Tap a network.
2.
Settings
Wireless
Settings
Wireless
Note: When you select an open network you are automatically connected.
If required, enter the wireless password and tap Connect.
3.
Manually add a new network connection
From the Home screen, tap
1.
and network
Wi-Fi settings.
Tap Add Wi-Fi network.
1.
Enter the Network SSID (the name of your Wireless Access
2.
Point).
Tap the Security field and select a security option. This must
3.
match the current security setting on your target WAP.
If the WAP is secured, enter the password.
4.
Tap Save to store the new information and connect to your
5.
target WAP.
Note: The next time your device connects to a previously accessed or secured
wireless network, you are not prompted to enter the WAP key again,
unless you reset your device back to its factory default settings.
Turning Wi-Fi Off
From the Home screen, tap
1.
Settings
Wireless
Settings
Wireless
Connections
119
Advertisement
Table of Contents
